SONY BDP-BX58 - BDP-S480 - BDP-S483 - BDP-S580 SERVICE MODE

SONY BDP-BX58 - BDP-S480 - BDP-S483 - BDP-S580 

SERVICE MODE 

Enter Service Mode
[OPTION 1]
The set disconnect AC, and Push front panel key ([OPEN/CLOSE] + [PLAY] + [STOP]) and AC IN The keys will be released if the character of "SERVICE" displays on a front panel display. After that, the screen in service mode is displayed on a monitor. Control via Remote Controller
[OPTION 2]
Connect the set to AC, and wait initialization cycle complete (FLD will show “wait.. Wait..” for about 10s) Use Sony BDP remote controller, key in the following SIRCS code. [DISPLAY] > [ 0 ] > [ 2 ] > [ 1 ] > [SUBTITLE] While sending of SIRCS code, wait time between each key code could not send later then 3 second. If 3 second waiting is exceeded user have to re-key in the SIRCS code. If SIRCS enter is successful, set will auto boot up and FLD will display SERVICE. The screen of service mode is displayed on a monitor. Control via Remote Controller
Diag
The unit test of the device mounted on the MainBoard.
The unit test of the device mounted on the wireless board. (only wireless model)
Display Error Log
Error log is displayed.
The displayed logs can be saved in a USB memory.
Factory Initialize
Return all of the player setting to their factory defaults.
Network
Confirm Wired Network connection.
Version Up
The set updates by Update DISC.
System Information
System information of the set is displayed.
The Information on a soft version and drive information, etc. is displayed.
EMC Test Mode
Not used.
Drive
Write Drive OP Data and check drive.
HDD Mode
Not used.
SERVCIE MODE MENU
Outline
Service Mode Top Menu
It selects to each function from here.
output HDMI/Component 480p forcibly
Operation
[1] Select and Activate Diag Menu.
[2] Select and Activate Log Menu,
[3] Select and Activate Factory Initialize Menu.,
[4] Select and Activate Network Menu
[5] Select and Activate Version Up
DISC version Up Menu,
[6] Select and Activate System Information Menu.
[7] Select and Activate EMC Test Mode Menu. (not Used)
[8] Select and Activate Drive Menu.
[9] Select and Activate HDD mode. (not Used)
[UP] Move Up cursor
[DOWN] Move Down cursor
[ENT] Activate the selected cursor.
DEVICE TEST MENU
Outline
The device carried in the substrate is tested.
(Window 1) Select test category
Operation

[LEFT] [RIGHT] Select Category
[DOWN][ENT] Activate the selected Category.
[RET] Return to Service Top Menu.
(Window 2) Device Test
After “Device Test” selects in window 1, the device to test is chosen.
Operation:
[LEFT][RIGHT] ----Select Device
[ENT]----- Activate and Start Test
[UP] -------Return to test category selection.IF select IFCON, Move Up cursor.
[DOWN] IF select IFCON, Move Up cursor.
[RET] Return to test category selection.
Test category list
Device Test
Video Test
Audio Test
Audio Input Test (not Used)
Wireless LAN Test (only Wireless Model)
Mic Test (only Karaoke Model)
HDMI Input Test (not Used)
Transcoder Test (not Used)
Wireless LAN Test
Outline:
Activate Wireless LAN Tests
(Window 1)Select Wireless LAN Test Category
Operation:
[LEFT] [RIGHT]---- Select Category
[DOWN][ENT] -----Activate the selected Category.
[RET] -----Return to Service Top Menu.
(Window 2) Select Wireless LAN Test
Operation:

[1] ----Show Wireless LAN module Information
[2] -----Connect Access Point
[3] ------Start display RSSI value.
[4] ------Start Ping Test
[UP][DOWN] -----Select Test
[ENT] ------Activate and Start Test
[RET]------ Return to test category selection