PHILIPS HTS3560 FACTORY RESET - REGION CODE SETTING - PASSWORD AND POWER SUPPLY CIRCUIT

PHILIPS HTS3560 

BLU RAY HT

FACTORY RESET - REGION CODE SETTING - PASSWORD AND POWER SUPPLY CIRCUIT 

Restore factory setting
a) Press <Home> button on R/C.
b) Select <SETUP>, then press “OK” button on R/C.
c) Select <Advanced setup> ,then press < OK > button on R/C.
d) Select <Restore default settings>,then press <OK> to confirm.
Password change
a) Press <Home> button on R/C.
b) Select <SETUP>, then press “OK” button on R/C.
c) Select <preference setup>, then press <OK> button on R/C.
d) Select <Change Password> <Confirm>, then press <OK> button
on R/C.
“0000” is default password supplied.
Trade mode
a) In open model,press <Home> button on R/C.
b) Press “2” “5” “9” on R/C,VFD will display “TRA ON” or “TRA OFF”
Check software version
a) Press  <Home> button on R/C
b) Select <Setup>, then press <OK> button on R/C.
c) Select <Advanced Setup> <Version Info.>,then press <OK> button on R/C.
d) TV will show message
e) Select <Close> on the version display screen and press <OK> button to exit .
Upgrading new software
Update software from a USB storage device or CD-R
a) Create a folder named “UPG” in your CD-R or USB storage device, and Copy the latest upgrading software into the folder.
b) Insert the CD-R program disc or connect the USB storage device to the home theater.
c) Press <Home> button on R/C, and select <Setup>.
d) Select <Advance Setup> <Software Update> <USB>.
e) TV will show message.
f) Select <Start>, press <OK> button on R/C.
g)The set will shut down automatically when the software upgrade is completed.
Update software from the network
Note: To check for new updates, compare the current software version of your home theater with the latest software version (if available) on the Philips web site, and for BD-Live application and software update, make sure that the network router has access to
the Internet and the firewall is disabled.
a) The “LAN” jack at the back panel of the set must be connect to the network router via network cable and the set connect to TV, Prepare the connection.
b) Press  <Home> button on R/C, and select <Setup>.
c) Select <Advance Setup> <Software Update> <Network>.
d) TV will show message.
e) Select <Start>, press <OK> button on R/C.
f) The set will shut down automatically when the software upgrade is completed.
BD board and Blu-ray Loader OPU matching procedure
Note: This procedure must be performed whenever the defective Blu-ray Loader or BD Board has been replaced .
a) Assembly Blu-ray Loader to BD Board.
b) Remove soldered joint on the ESD protection points.
c) Power on the set , press <Home> button and input “5” “1” “7” “7” on R/C.
d) Go into OSD Select mode and select item [5] ,then press <OK> button on R/C.
e) Insert empty USB device of MSC type and press <OK> button with R/C.
f) Using “LEFT,RIGHT,UP,DOWN ”ARROW buttons on R/C input the 6-digits OPU data given on the 1D barcode (see label on the Loader) with the onscreen selection and press <OK> button to save each digit entered.
g) Press <Back> followed by <OK> button to finish OPU matching and <Home> button to exit.
h) Repeat step c) and select item [6] ,then press <OK> button on R/C.
i)Wait laser check to complete,press <stop> button to exit.
j) If laser check fails press  <Home> button and repeat OPU matching procedure.
DVD Region Code Change
a) In open mode, press “8” “6” “8” “9” “3” “1” on R/C, then input desired number to change region code:
1 USA
2 EU
3 APAC
4 Australia ,NZ, Latam
5 Russia ,India
6 China
SMPS POWER SUPPLY CIRCUIT