SONY - KDL-32W5800 - KDL-37W5800 - KDL-40W5800 - KDL-46W5800 - KDL-52W5800 SERVICE MODE AND POWER SUPPLY CIRCUIT

SONY - KDL-32W5800 - KDL-37W5800 - KDL-40W5800 - KDL-46W5800 - KDL-52W5800



SERVICE MODE AND POWER SUPPLY CIRCUIT

To bring up the self diagnostic screen display
In standby mode, press the following buttons on the remote commander sequentially in rapid sucession as shown below:
ON SCREEN DIASPLAY > CHANNEL 5 > VOLUME – > POWER ON
SERVICE MODE
1. Turn on the power to the TV set and enter into the stand-by mode.
2. Press the following sequence of buttons on the Remote Commander.

ON SCREEN DIASPLAY > CHANNEL 5 > VOLUME + 

> POWER ON

After carrying out the service adjustments, to prevent the customer accessing the ‘Service Menu’ switch the TV set OFF and then ON.

Changing TVM Data Settings
1. Press “2 / 5” on the remote commander to select (up / down) category
2. Press “1 / 4” on the remote commander to select (up / down) item
3. Press “3 / 6” on the remote commander to select (up / down) data
 Writing TVM Data
1. Press “Mute” on the remote commander. The word “SERVICE” changes to “WRITE”
2. Press “0” on the remote commander. The word “WRITE” changes to red. This indicates writing is in progess.
POWER SUPPLY CIRCUIT 
CLICK ON THE IMAGE TO ZOOM IN