FUNAI LDD-A2006 SERVICE MODE AND POWER SUPPLY CIRCUIT

FUNAI LDD-A2006

 20" LCD TV/DVD 



SERVICE MODE AND POWER SUPPLY CIRCUIT 

How to Set up the Service mode
1. Turn the power on. (Use main power on the TV unit.)
2. Press [STANDBY], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
- To cancel the service mode, press [STANDBY] button on the remote control.
Flicker Adjustment
1. Enter the Service mode.
2. Press [2] button on the remote control unit
3.If Flicker Adjustment is not fit, the screen becomes the following.
4. Press [CH. UP / DOWN] buttons on the remote control unit so that flash stops.
INITIALIZE THE LCD TV
1. Turn the power on. (Use main power on the TV unit.)
2. To enter the service mode, press [STANDBY], [2], [7], [1], and [MUTE] buttons on the remote control unit in that order within 5 seconds.
- To cancel the service mode, press [STANDBY] button on the remote control.
3. To initialize the LCD television, press “DISPLAY” button on the remote control unit.
4. Confirm "FF" indication on the upper right of the screen.
POWER SUPPLY 
CLICK ON THE IMAGE TO ZOOM IN